How to Fix DPC_WATCHDOG_VIOLATION Blue Screen Error?
The
DPC_WATCHDOG_VIOLATION blue screen error is a stop error which is also
identified by the error code 0x00000133 bug checks. This error signifies that
the DPC watchdog violation error was implemented as it identified a DPC (single
long-delayed process call) or the computer system spent much more time on one
or more DISPATCH_LEVEL interrupt request level (IRQL).
Source:- Webroot Support
However, this
error might be caused due to various other reasons including, unsupported SSD
firmware, old SSD driver models, due to hardware unsuitability issues, or
system files. In case, if any user is using the SSD in on their Windows
computer system, we recommend you to first ensures that the firmware version of
the SSD and also confirm that the updated version is installed on your system.
Symptoms of BSOD Error Code 0x00000133
Following
symptoms of BSOD Error code 0x00000133 are as follows:
●
Crashes the active program window.
●
While working with the system, it displayed a Stop error 0x133
DPC_WATCHDOG-VIOLATION.
●
When the issue is identified, Windows has been automatically shut
down to stop damages to your system.
●
While running the same program, your system appeared with the same
error 0x00000133.
●
Windows computer runs sluggishly and also respond slowly to
inputs.
●
Computer system freezes for a few seconds.
Causes of BSOD Error Code 0x00000133
There are
various reasons behind the occurrence of this error, but some most important
and popular are listed below:
●
Corrupted or damaged device drivers.
●
Incorrectly configured device drivers.
●
Any malicious program, malware or viruses has corrupted system
files.
●
It is caused by a damaged or corrupted hard disk.
●
Error Code 0x00000133 caused due to issue in RAM or memory
corruption.
●
After installing the new hardware, the driver has conflicts.
Underneath in
this article, we will teach you by providing a few effective steps which help
you in fixing the error code 0x00000133. The steps are discussed below.
Steps to Fix DPC_WATCHDOG_VIOLATION Blue Screen Error
To fix this
error without any error, follow the steps in an exact series to avert problem
and unwanted errors and glitches. We recommend you to perform a full system
scan to detect the problem relate to viruses or any malicious programs. Here
how to fix it:
Solution-1: Turn off Fast Startup
By turning off
the Fast Startup, you can be able to troubleshoot the error code 0x00000133.
Follow the given steps:
1. Click on the ‘Start’ logo
to launch the Start menu.
2. In the start menu, click
on the ‘Control Panel’ tab to launch it.
3. After that, press the
‘Change Settings’ icon which might be not available.
4. Next, uncheck the ‘Turn
on Fast Startup’ box appears on the screen.
5. Restart your computer
system to save all the changes.
Solution-2: Update System Driver
Probably,
updating the system driver might help you in fixing the problem or error.
However, you can easily repair or update Windows driver by applying a manual
solution, or you can also choose any professional system driver updater tool
for updating it. Here we can do it manually.
1. Hit the Windows + R tabs
all together on the keyboard to launch the ‘Run’ search box.
2. Under the run search box,
enter ‘msc’ and hit the Enter tab.
3. After that, look for the
‘IDE ATA/ATAPI controllers’ and click to expand it.
4. Next, right-click on the
driver and then choose ‘Update Driver from the given list.
5. Lastly, from the list
choose the method by which you update the selected driver.
6. Finally, restart your
computer system to apply all the changes.
Note: To update
all system drivers, repeat the aforementioned steps.
Comments
Post a Comment